Responding to Messages
Error messages (if no action can be taken)
In the following situations, turn of f the printer and wait at least three seconds before restoring power .
If the message is still displayed, write down the error code and message, turn of f the printer , and contact your
Canon dealer for assistance.
• The error message is displayed with the following instructions: T urn off printer , wait, then turn on
again.
• “ERROR” is displayed, followed by the error code and Call for service.
Note
• Messages are also displayed in imagePROGRAF Status Monitor (Windows) or imagePROGRAF
Printmonitor (Macintosh).
Error Message 763
To Next Page
Loading...
Need help?
General