EasyManuals Logo

Canon imagePROGRAF IPF9100 User Manual

Canon imagePROGRAF IPF9100
812 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #692 background imageLoading...
Page #692 background image
Ink T anks
Replacing Ink T anks
Compatible Ink T ank
The printer supports both 330 ml (1 1.2 oz) and 700 ml (23.7 oz) Ink T anks as replacement tanks.
An Ink T ank for this printer is labeled with a white letter “H” in a black circle on the side. Request an Ink T ank
with the same label when you purchase a new Ink T ank . For more information, see “Ink T anks”. (→P .676)
Precautions when handling an Ink T ank
T ake the following precautions when handling an Ink T ank .
Caution
For safety , keep an Ink T ank out of the reach of children.
If ink is accidentally ingested, contact a physician immediately .
Important
Before removing an Ink T ank from the pouch for installation, shake it gently seven or eight times. If you
do not shake the Ink T ank , the ink may sediment, which may af fect printing quality .
Do not remove and shake an Ink T ank that has already been installed in the printer . Ink may leak out.
A void dropping the Ink T ank after removing it from the pouch. Otherwise, ink may leak and cause stains.
There may be ink around the ink holes of Ink T ank you remove. Handle an Ink T ank carefully during
replacement. The ink may stain clothing.
W e recommend using up an Ink T ank in the course of printing within six months after breaking the seal.
Using an old Ink T ank may af fect the printing quality .
Do not remove the Ink T ank if the printer is not used for a long period (a month or more). Ink remaining
in the printer may become clogged and cause of printing problems.
Coverage may be uneven if you replace the ink during a print job.
How to Replace the Ink T ank
1. Make sure the printer is ready for Ink T ank replacement . (→P .679)
2. Access the menu for Ink T ank replacement . (→P .679) (Otherwise, open the Ink T ank Cover .)
3. Remove the Ink T ank .
330 ml (1 1.2 oz) Ink T ank (→P .680)
700 ml (23.7 oz) Ink T ank (→P .682)
4. Load the new Ink T ank .
330 ml (1 1.2 oz) Ink T ank (→P .684)
700 ml (23.7 oz) Ink T ank (→P .687)
678 Maintenance

Table of Contents

Other manuals for Canon imagePROGRAF IPF9100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF IPF9100 and is the answer not in the manual?

Canon imagePROGRAF IPF9100 Specifications

General IconGeneral
BrandCanon
ModelimagePROGRAF IPF9100
CategoryPrinter
LanguageEnglish

Related product manuals