Handling rolls
4. Using both hands, rotate the Roll Holder in the direction of the arrow to rewind the roll.
5. Remove the Roll Holder from the Roll Holder Slot .
6. Lower the Ejection Guide and close the T op Cover .
Important
• If the Platen inside the T op Cover becomes dirty , it may soil the underside of paper . Clean the Platen
after borderless printing or printing on small paper .
• Setting CarriageScanWdth to Fixed on the Control Panel may reduce soiling on the underside of
the paper . However , this requires more time for printing.
Handling Paper 185
To Next Page
Loading...
Need help?
General