Handling rolls
Manual (when using media that cannot be cut using the Cutter Unit )
1. Press the Menu button to display MAIN MENU .
2. Press ▲ or ▼ to select Paper Details , and then press the ► button.
3. Press ▲ or ▼ to select the type of paper , and then press the ► button.
4. Press ▲ or ▼ to select Cutting Mode , and then press the ► button.
5. Press ▲ or ▼ to select Manual , and then press the OK button.
6. Start printing.
The printer stops advancing the paper after printing.
7. Press the Online button.
Roll paper is fed to the specied cut position and then automatically stopped.
8. Cut the roll paper manually with scissors or the like.
9. Press the Online button.
The roll is rewound, and rewinding stops automatically .
Handling Paper 193
To Next Page
Loading...
Need help?
General