Print quality and color settings
7. In the A Media T ype list, select the type of paper that is loaded.
8. Click D Advanced Settings to switch the print mode.
9. Click Line Drawing in the E Print Priority list.
10. Click Standard(600dpi) in the F Print Quality list.
Note
• Options displayed in the F Print Quality list vary depending on the paper type.
1 1. Click Monochrome in the H Color Mode list.
12. T o adjust the brightness and contrast, click I Set .
Note
• For instructions on adjusting brightness and contrast, see “Adjusting the Color in the Printer Driver”.
(→P .252)
Enhanced Printing Options 261
To Next Page
Loading...
