Control Panel
First Level
Second Level
Third Level Fourth Level
Fifth Level
Y es
Menu Map No
Y es
Nozzle Check No
Y es
Information System Info
Error Log ######## - ####
Job Log (Choose from
information about
the latest three print
jobs.)
Document Name
User Name
Page Count
Job Status
Print Start T ime yyyy/mm/dd
hh:mm
Print End T ime yyyy/mm/dd
hh:mm
Print T ime xxx sec.
Print Size xxxxxxxxsq.mm
Media T ype
Interface
Ink Consumed xx.x ml
HDD Information HDDSpace
*1: A vailable only if a roll is loaded.
*2: A vailable only if Chk Remain.Roll is On .
*3: A vailable if Feed Priority is Automatic or Print Length .
*4: A vailable only if IP Mode is Manual .
*5: For information on the types of paper the printer supports, refer to the Paper Reference Guide .
( → P .167) The paper type setting in the printer driver and related software (as well as on the Control
Panel ) is updated when you install the printer driver from the User Software CD-ROM or if you change
paper information by using the Media Conguration T ool . See the Media Conguration T ool Guide
(Windows) or Media Conguration T ool Guide (Macintosh).
*6: Not displayed if NetW are is Off .
*7: Not displayed if Auto Detect is On .
*8: Follows the setting in Date Format .
*9: Displayed if the Media T ake-up Unit is attached.
*10: A vailable after you have used Advanced Adj. in Auto Head Adj. once.
*1 1: A vailable if: (a) T ake-up Reel is Enable , (b) roll paper is loaded, and (c) you have not executed
Auto Feed for the loaded roll.
*12: Not displayed if IP Mode is Automatic .
*13: Follows the setting in Length Unit .
44 Printer Parts
To Next Page
Loading...
Need help?
General