Control Panel
Maintenance
Setting Item Description, Instructions
Repl. maint cart When replacing the Maintenance Cartridge , choose Y es and follow the
instructions on the screen. ( → P .706)
Replace P .head Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low .
When replacing the Printhead , choose Y es and follow the instructions
on the screen. ( → P .695)
Repl. S. Cleaner When replacing the Shaft Cleaner , choose Y es and follow the
instructions on the screen. ( → P .706)
Change Cutter When replacing the Cutter Unit , choose Y es and follow the instructions
on the screen. ( → P .703)
Y ou can also reset the cut counter after the Cutter Unit is replaced.
Move Printer When transferring the printer to another location, choose the level of
transfer and follow the instructions on the screen. ( → P .722)
Printer Parts 55
To Next Page
Loading...
