Ink T anks
Remove the Ink T ank (330 ml [1 1.2 oz])
1. Open the Ink T ank Cover of the tank for replacement and check the Ink Lamp .
The Ink Lamp ashes quickly if there is no ink left.
Caution
• A void hitting the printer when replacing an Ink T ank . Handle the printer gently when replacing tanks.
2. Lift the stopper (a) of the Ink T ank Lock Lever of the color for replacement. Lift the Ink T ank Lock
Lever until it stops, and then push it down to the front.
Important
• Down the Ink T ank Lock Lever until the lever is locked.
• Conrm the Ink T ank Lock Lever is not returned.
680 Maintenance
To Next Page
Loading...
Need help?
General