Ink T anks
3. Press the OK button and insert the Ink T ank into the holder facing as shown in the gure, with
the ink holes down.
Important
• Ink T ank cannot be loaded in the holder if the color or orientation is wrong.
If the Ink T ank does not t in the holder , do not force it into the holder . Make sure the color of the
Ink T ank Lock Lever matches the color of the Ink T ank , and check the orientation of the Ink T ank
before reloading it.
4. Lift the Ink T ank Lock Lever until it stops, and then push it down until it clicks into place.
Maintenance 685
To Next Page
Loading...
Need help?
General