Cleaning the Printer
3. Using a damp cloth that you have wrung out completely , wipe inside the T op Cover to clean
it. Wipe away any ink residue on the T op Cover Roller (a), all over the Platen (b), the Paper
Retainer (c), the Borderless Printing Ink Grooves (d), the Ejection Guide (e), the cutter guide
(f), the left-side ink suction ports (g), the section around the right-side Borderless Printing Ink
Grooves (h), and so on.
Important
• Do not use a dry cloth to wipe inside the T op Cover . This may create a static charge, which may
attract dust and af fect the printing quality .
• Never use ammable solvents such as alcohol, benzene, or thinner . If these substances come into
contact with electrical components inside the printer , there is a risk of re or electrical shock.
• Do not touch the clear sheet on the side of the T op Cover Roller . This may damage the roller .
4. Close the T op Cover .
720 Maintenance
To Next Page
Loading...
