Other Maintenance
T o protect the internal parts in transit, always follow the steps below before transferring the printer to a new
location. Refer to the Quick Start Guide for details on packing the printer and installing it after transfer .
Caution
• A void tipping the printer excessively in transit. Ink inside the printer may leak and cause stains. If it is
necessary to stand the printer up or tilt it, contact your Canon dealer .
1. Remove the paper .
• Roll
( → P .184)
( → P .179)
• Sheet
( → P .214)
2. Press the Menu button to display MAIN MENU .
3. Press ▲ or ▼ to select Maintenance , and then press the ► button.
4. Press ▲ or ▼ to select Move Printer , and then press the ► button.
5. Press ▲ or ▼ to select the level of transfer , and then press the OK button.
The printer now starts preparing for transfer .
Under Level 1 conditions, follow the procedure starting with step 12. There is no need to remove
Ink T ank .
When you are nished preparing to transfer the printer under Level 2 or Level 3 conditions, the
Display Screen prompts you to open the Ink T ank Cover . Y ou must remove the Ink T ank at this
point. Follow the procedure starting with step 6.
6. Open the left and right Ink T ank Covers .
Maintenance 723
To Next Page
Loading...
Need help?
General