Paper Sizes
Rolls
Rolls that meet the following conditions are supported.
• Outer diameter is 6.7 in (170 mm) or less
• Inner diameter of paper core: 2 or 3 inches
• Printing side out
Roll Width Printer Driver Roll Paper Width Settings Borderless Printing (*1)
609.6 mm (24.00 in) 24-in. Roll (609.6mm) Recommended
594.0 mm (23.39 in) ISO A1/A2 Roll (594.0mm) Recommended
515.0 mm (20.28 in) JIS B2/B3 Roll (515.0mm) Recommended
431.8 mm (17.00 in) 17-in. Roll (431.8mm) Recommended
420.0 mm (16.54 in) ISO A2/A3 Roll (420.0mm) Possible(*2)
406.4 mm (16.00 in) 16-in. Roll (406.4mm) Possible(*2)
355.6 mm (14.00 in) 14-in. Roll (355.6mm) Recommended
329.0 mm (12.95 in) A3+ Roll (329.0mm) Possible(*2)
300.0 mm (11.81 in) 300mm Roll (300.0mm) Possible(*2)
297.0 mm (11.69 in) ISO A3/A4 Roll (297.0mm) Possible(*2)
257.0 mm (10.12 in) JIS B4 Roll (257.0mm) Possible(*2)
254.0 mm (10.00 in) 10-in. Roll (254.0mm) Recommended
203.2 mm (8.00 in) 8-in. Roll (203.2mm) Possible(*2)
*1:For details on media types that can be used for borderless printing, see "Paper Information List."
*2:As opposed to standard borderless printing, there will be a small margin on the left and right because the paper
width is set a little bit smaller than the width of the document.
Sheets
Sheets of the following sizes are supported.
Paper Sizes Dimensions
ISO A1 594.0 × 841.0 mm (23.39 × 33.11 in)
ISO A2 420.0 × 594.0 mm (16.54 × 23.39 in)
ISO A2+ 431.8 × 609.6 mm (17.00 × 24.00 in)
43
To Next Page
Loading...
