Printing by Connecting Multiple Pages
You can eliminate the blank spaces between pages in a document that extends over multiple pages and
print the document as one continuous document.
The procedure for printing by connecting multiple pages is as follows:
1.
Open the printer driver setup window
2.
Select the paper source
For Paper Source on the Page Setup tab, select the setting that matches your purpose from Roll Paper
(Auto), Roll 1, and Roll 2.
Important
• The paper feed method will differ according to the paper or lower level (roll paper 2) settings, or
roll unit option settings.
3. Set roll paper options
Click Roll Paper Options to display the Roll Paper Options dialog box.
Select the Banner Printing check box, and then click OK.
The current settings are displayed in the settings preview on the left side of the Page Setup tab.
545
To Next Page
Loading...
