(Signal strength: 81 % or more): You can use the printer over a Wi-Fi without any problems.
(Signal strength: 51 % or more): The problem such as the printer cannot print may occur
according to the network status. We recommends placing the printer near the wireless router.
(Signal strength: 50 % or less): The problem such as the printer cannot print may occur.
Place the printer near the wireless router.
Wi-Fi is enabled but the printer is not connected to the wireless router.
Wired LAN is enabled.
Wireless Direct is enabled.
Wi-Fi and Wired LAN are disabled.
G: Setup
Selects when changing the printer settings, performing maintenance, or checking printer information.
H: Information
Displays various printer information.
I: Job management
Select to make settings for managing print jobs.
Note
• By default, menu settings apply to all print jobs. However, for settings that are also available in the•
printer driver, the values specified in the printer driver take priority.
Basic Touch Screen Operations
You can select various functions and settings by gently touching and swiping the touch screen with your
fingertip.
Important
• Take the following precautions when operating the touch screen. Otherwise, the touch screen may•
malfunction or become damaged.
Do not forcibly press the touch screen with your finger.
Do not press the touch screen with an object other than your finger (such as a ballpoint pen,
pencil, fingernail, or other object with a sharp tip).
Do not operate the touch screen with wet or dirty hands.
Do not place objects on top of the touch screen.
• Do not place a protective film over the touch screen. Removing it can damage the touch screen.
310
To Next Page
Loading...
Need help?
General