Canon imageRUNNER 2545 Series User Manual

2
2
2-37
2-37
Technology > Image Formation System > Basic Sequence > Sequence of Operation (last rotation)
Technology > Image Formation System > Basic Sequence > Sequence of Operation (last rotation)
Basic Sequence
The basic sequence is as follows.
■
Sequence of Operation (initial rotation)
• Pickup from cassette
Pickup
ON
Registration
ON
Primary charging AC bias
Main Motor (M1)
Primary charging DC bias
Laser
Developing AC bias
Developing DC bias
Developing cylinder clutch (CL3)
Transfer bias
Static eliminator bias
• Pickup from manual feeder
Multi
ON
Registration
ON
Primary charging AC bias
Main Motor (M1)
Primary charging DC bias
Laser
Developing AC bias
Developing DC bias
Developing cylinder clutch (CL3)
Transfer bias
Static eliminator bias
F-2-57
F-2-58
■
Sequence of Operation (printing)
Primary charging
AC bias
Main Motor (M1)
Primary charging
DC bias
Laser
Developing AC bias
Developing DC bias
Developing cylinder
clutch (CL3)
Transfer bias
Static eliminator bias
Image formation sequence
(1st sheet)
Image formation sequence
(2nd sheet and later)
Sheet-to-sheet
sequence
Registration
ON
Registration
ON
Image write
end
■
Sequence of Operation (last rotation)
Image write
end
Primary charging AC bias
Main Motor (M1)
Primary charging DC bias
Laser
Developing AC bias
Developing DC bias
Developing cylinder clutch (CL3)
Transfer bias
Static eliminator bias
[1]
In [1] above, a cleaning bias (-2700V) is applied.
F-2-59
F-2-60

Canon imageRUNNER 2545 Series Specifications

General

Brand	Canon
Model	imageRUNNER 2545 Series
Category	Copier
Language	English