Canon iPF605 - Page 263

Chapter 8
8-5
Hardware error.
03130031-2E23
Turn off printer, wait, then turn on
again.
03130031-2F23 Purge motor error
Pump inoperable
Check the purge unit.
Hardware error.
03130031-2E25
Turn off printer, wait, then turn on
again.
03130031-2F25 Unable to detect the carriage motor home
position
Check the carriage unit. Check the linear encoder for
smears.
Hardware error.
03130031-2E26
Turn off printer, wait, then turn on
again.
03130031-2F26 Carriage inoperable Check the carriage unit and surrounding parts.
Hardware error.
03130031-2E27
Turn off printer, wait, then turn on
again.
03130031-2F27 Carriage travel timeout Check the carriage unit and surrounding parts.
Hardware error.
03130031-2E1F
Turn off printer, wait, then turn on
again.
03130031-2F1F Pump cam sensor error Check the purge unit.
Hardware error.
03130031-2E2A
Turn off printer, wait, then turn on
again.
03130031-2F2A Unable to detect the feed roller home
position
Check the feed roller encoder and surrounding part.
Check to see if paper has not jammed.
Hardware error.
03130031-2E29
Turn off printer, wait, then turn on
again.
03030000-2F29 Feed motor timeout (Roll media) Check the roll feed unit. Check roll media. Check to see
if paper has not jammed in the printer.
Hardware error.
03130031-2E2E
Turn off printer, wait, then turn on
again.
03130031-2F2E Roll travel timeout Check the roll feed unit.
Hardware error.
03130031-4027
Turn off printer, wait, then turn on
again.
03130031-4027 Lift travel timeout error Check the carriage unit and surrounding parts.
Hardware error.
03130031-2E13
Turn off printer, wait, then turn on
again.
03130031-2F13 A/D converter external trigger output stop
detection hardware error 1
Replace the new printhead.
Hardware error.
03130031-2F32
Turn off printer, wait, then turn on
again.
03130031-2F32 Multi sensor error Check the environment for interferences from outside
light.
Replace the multi sensor unit.
Hardware error.
03130031-2F3A
Turn off printer, wait, then turn on
again.
03130031-2F3A Valve motor error Check the ink supply unit.
Hardware error.
03130031-2F3B
Turn off printer, wait, then turn on
again.
03130031-2F3B CS communication error Remove the ink tanks and then reload them.
Check the main controller PCB.
Hardware error.
03130031-260E
Turn off printer, wait, then turn on
again.
0130031-260E Gap detection error Check the carriage unit and surrounding parts.
Replace the main controller PCB.
Hardware error.
03130031-2618
Turn off printer, wait, then turn on
again.
03130031-2618 VH voltage error Check the power supply unit.
Hardware error.
03130031-260F
Turn off printer, wait, then turn on
again.
03130031-260F Gap reference surface error Replace the reference surface sheet.
Roll feed unit err
Turn off printer and check roll
feed unit
03060A00-2E24 Roll feed unit failure Replace the roll feed unit.
Display massage Code* Condition detected Action