5
5
5-33
5-33
Trouble Shooting > Updater > Overview > Maintenance
Trouble Shooting > Updater > Overview > Maintenance
■
Maintenance
●
Upgrading Updater
The rmware installed in the device should be also upgraded when upgrading Updater. The
setting information and logs (update logs/system logs) are inherited in the upgraded version.
●
How to Replace Controller Boards
• Main Controller Board PCB (including SRAM)
The network and service mode setting should be set again after initialization. See
"Preparation" in "Version Upgrade" of this manual for details.
●
How to Replace Devices
All settings should be set again because no data are inherited. See "Preparation" in "Version
Upgrade" of this manual for details.
To Next Page
Loading...
