5
5
5-50
5-50
Trouble Shooting > Debug log > Collecting Sublog > Collecting log
Trouble Shooting > Debug log > Collecting Sublog > Collecting log
■
Collecting log
1) Connect the PC and the host machine by a network cable and check that communication
is available.
a. When directly connecting a PC and the host machine, connect by a cross cable.
b. Check the IP address of the host machine by the Control Panel.
c. Check that a ping is sent to the IP address of the host machine from the command prompt
of PC.
2) Enter service mode of the host machine. Select [LOG Gr.].
SERVICE MODE
ADJUST GR.
OPTION GR.
FUNCTION GR.
LOG GR.
3) Select [SUBLOG FTP GET].
LOG GR.
SYSTEM LOG
Logging Utility
SUBLOG FTP GET
DEBUGLOG-SW
F-5-54
F-5-55
4) Select [YES].
Execute?
Yes
No
5) The host machine restarts and after blinking [STARTING] is displayed on the panel, [DL-T
FTPD OK] is displayed.
DL-T FTPD OK!
6) From the PC to receive the le, start FTP from command prompt.
Enter the IP address of the device (or the host name) to connect and log in.
Example: [ftp xxx.xxx.xxx.xxx (IP address)]
C:╲Users╲1234>ftp 172.16.1.170
F-5-56
F-5-57
F-5-58
To Next Page
Loading...
