Canon LBP6670dn Series - Page 164

5
5
5-45
5-45
Trouble Shooting > Updater > Overview > Error Codes
Trouble Shooting > Updater > Overview > Error Codes
Error Code (hex number) Description Remedy Cause of error
The rst
digit Error
eld
The second
digit
Operator
The 3rd - 4th
digits Method
category
The 5th digit
Category
code
The 6 - 8th digits
Description
code
CDS
delivery
server
UP
DATER
CDS le
server
Network
0 1 3 The delivery time which specied is in CDS delivery stop
time
- - - -
0 1 4 The rmware reservation status of conrmation time-out - - - -
0 1 5 The rmware delivery time-out - - - -
0 1 6 The version upgrade of rmware is time-out - - - -
2 I/O
0 0 1 The specied license access number does not exist in LMS - - - -
0 0 2 The specied license access number has been deauthorized - - - -
0 0 3 The package product of the entered license access number
doesn't include MEAP application/System Option
- - - -
0 0 4 The sales company for the MEAP application isn't identical
with the sale company for the package product
- - - -
0 0 5 The number of licenses to be issued will exceed the limit
number allowed to register
- - - -
0 0 6 As for System Option for the same function, the license keys
were issued more than the dened number of times for the
same device serial number
- - - -
0 0 7 No device product exists applicable to the optional product - - - -
0 0 8 No product exists applicable to the device serial number - - - -
0 0 9 The product of the entered license access number cannot
be used with this device because the settings of the sales
company are incorrect
- - - -
0 0 A No product linked to the license access number is registered
in CDS for delivery
- - - -
0 0 B Although the product linked to the license access number is
registered in CDS for delivery, the delivery is stopped now
- - - -
0 0 C No existence of optional product applicable to the device
serial number.
- - - -
0 0 D The license access number has been registered for another
device
- - - -
0 0 E For the device product applicable to the device serial
number, no available software (MEAP application, System
Option) exists
- - - -
0 1 0 LMS system error - - - -
2~5
x x Relating method code
0 Not cartelized
0 0 0 Not dened Normally not indicated
1 0 0 Unknown error Normally not indicated
1 Operation
0 0 1 Processing exclusively Start the operation again after
terminating other Updater operations
being executed simultaneously
- - -
1 0 1 Failed to process preparation for use - - - -
1 0 2 Failed to process use end - - - -
1 0 3 Time out during restart of readiness preparation - - - -