Note
• To show the password, select Show password. To hide the password, select Hide
password
.
• The password is required when connecting smartphone/tablet/computer to the printer.
2. Select "DIRECT-XXXX-GX6000series" ("X" represents alphanumeric characters) on your
smartphone/tablet/computer.
Note
• If "DIRECT-XXXX-GX6000series" does not appear on the list, Wireless Direct is not
enabled.
See Changing Printer Setting to Use Wireless Direct to enable Wireless Direct.
3. Enter Password on smartphone/tablet/computer.
The smartphone/tablet/computer is connected to the printer
.
Note
• If the printer is set to display a confirmation screen in Connection request
confirmation of Changing Wireless Direct Setting, when the wireless direct compatible
device connects to the printer, a confirmation screen asking for permission to connect
is displayed on the printer touch screen
.
Make sure the name on the touch screen is the same as that of your wireless
communication device and select Yes.
You can print from your smartphone or tablet by installing Canon PRINT Inkjet/SELPHY. Download it from
App Store and Google Play.
For iOS device
For Android device
Changing Wireless Direct Setting
Change the settings for the Wireless Direct following the procedure below.
1. Make sure the printer is turned on.
2. Select (Setup) on HOME screen and then select Device settings.
Note
• If User management settings is enabled, the user selection screen is displayed before the
HOME screen is displayed.
3. Select LAN settings.
4. Select Wireless Direct.
49
To Next Page
Loading...
