Canon MVX10 User Manual (English)

Questions and Answers:

K
Kari BeardJul 30, 2025
What to do if buttons will not work on Canon Camcorder?
- E
  Elizabeth McdonaldJul 30, 2025
  If the buttons on your Canon Camcorder aren't working, here are a few things to check: * Ensure the camcorder is turned on. * Make sure a cassette is loaded. * Verify the battery pack is charged or replaced with a fresh one. * If the camcorder stopped to protect the tape, try unloading and reloading the cassette. * Check that the camcorder and wireless controller (if applicable) are set to the same remote sensor mode and that the wireless controller's batteries are not exhausted.
M
Mary BarrettAug 4, 2025
Why is my Canon MVX10 not displaying movies in CARD PLAY (VCR) mode?
- P
  Phyllis BensonAug 4, 2025
  If your Canon Camcorder isn't displaying movies in CARD PLAY (VCR) mode, consider the following: * Ensure the memory card is inserted correctly. * Check if the memory card is full and replace it or erase images. * Make sure the memory card is formatted. * Verify that the camcorder is set to CARD PLAY (VCR) mode. * If the camcorder displays the still image playback mode, press the CARD STILL/MOVIE button to switch to MPEG-4 movie playback.
P
Paul HensonAug 9, 2025
What to do if pressing the playback button does not start playback on Canon Camcorder?
- S
  Steven MichaelAug 9, 2025
  If pressing the playback button on your Canon Camcorder doesn't start playback, try the following: * Ensure the camcorder is turned on and set to PLAY (VCR) mode. * Make sure a cassette is loaded. * Rewind the tape if it has reached the end. * In the menu, set [AV/PHONES] to [AV] and [AV / DV OUT] to [OFF]. * Ensure the TV/VIDEO selector on the TV is set to VIDEO.
T
Tara LevineAug 13, 2025
How to fix Canon Camcorder when button will not start recording?
- L
  Lori ClarkAug 13, 2025
  If the button on your Canon Camcorder won't start recording, consider these possibilities: * Ensure the camcorder is set to CAMERA mode. * Set the time zone, date, and time, or replace the backup battery and reset the date and time. * Make sure the camcorder is turned on and a cassette is loaded. * Rewind or replace the tape if it has reached the end, or change the position of the protect switch if the cassette is protected. * Focus manually if autofocus doesn't work, and clean the lens if it's dirty.
R
reynoldsmeganAug 18, 2025
Why the printer is not operating even though Canon Camcorder and printer are correctly connected?
- D
  douglasdaltonAug 18, 2025
  If the printer is not operating even though your Canon Camcorder and printer are correctly connected, it may be because the camcorder is set to NETWORK mode. To resolve this: 1. Set the camcorder to CARD PLAY (VCR) mode. 2. Disconnect and reconnect the USB cable. 3. Turn off the printer and turn it back on.
G
gina96Aug 25, 2025
How to open cassette compartment on Canon Camcorder?
- S
  Samuel BauerAug 25, 2025
  To open the cassette compartment on your Canon Camcorder, open the cassette compartment cover fully.