Canon MVX10 - Selecting the Audio Output Channel

40
Mastering
the Basics
E
Selecting the Audio Output Channel
You can select the output channels when playing back a tape with audio recorded on
two channels.
1. Press the MENU button to open the menu.
2. Turn the selector dial to select [AUDIO SET UP] and
press the selector dial.
3. Turn the selector dial to select [OUTPUT CH] and
press the selector dial.
4. Turn the selector dial to select a setting option.
• L/R: Stereo: L+R channels, Bilingual: Main+Sub.
• L/L: Stereo: L channel, Bilingual: Main.
• R/R:Stereo: R channel, Bilingual: Sub.
5. Press the MENU button to close the menu.
The setting resets to the L/R setting when you turn the camcorder off.
CARD PLAY (VCR)
CARD CAMERA
PLAY (VCR)
CAMERA
OUTPUT CH••••L/RAUDIO SET UP
( 41)
2_D76PAL_E(13-40) 26/06/03 12:00 Page 40