Canon MVX10 - Returning to a Pre-Marked Position

85
Using the Full Range of Features
E
Returning to a Pre-marked Position
If you wish to return to a particular scene
later, mark the point with the zero set
memory and the tape will stop at that point
when you rewind/fast forward the tape.
1. Press the ZERO SET MEMORY button at the point
you wish to return to later.
•“0:00:00 ” appears.
•To cancel, press the ZERO SET MEMORY button again.
2. When you have finished playback, fast forward or
rewind the tape.
•“RTN 1” or “` RTN” appears.
• The tape stops automatically at “0:00:00”.
• The tape counter changes to time code.
❍ Time code and tape counter display may not match accurately.
❍ The zero set memory may not function correctly when blank sections exist on
the tape.
❍ If you remove the tape, the zero set memory is cancelled and the counter
display shows the time code.
CARD PLAY (VCR)
CARD CAMERA
PLAY (VCR)CAMERA
REW PLAY FF
MENU
REC
PAUSE
ZERO SET
MEMORY
AUDIO DUB.
STOP
SET
S
PAUSE SLOW
//
× 2
ZERO SET
MEMORY
button
REW ` button
PLAY e button
FF 1 button
STOP 3 button
3_D76PAL_E(41-85) 26/06/03 12:04 Page 85