Canon PIXMA E481 - Loading Documents in the ADF (Auto Document Feeder)

Loading Documents in the ADF (Auto Document Feeder)
Note
• To scan a document at optimum quality, load it on the platen glass.
1. Make sure that any original has been removed from the platen glass.
2.
Open the document tray.
3.
Insert the document in the document tray until you hear a beep sound.
Load the document WITH THE SIDE TO SCAN FACING UP in the document tray.
Originals You Can Load
Note
• When you set the alarm to be silent in Sound control of Dev. user settings, the alarm will not
beep even if the document is inserted in the document tray.
Dev. user settings
4.
Adjust the document guide (A) at the front of the machine to match the width of the
document.
Do not slide the document guide too hard against the document. The document may not be fed properly.
149