Canon PIXMA E481 - Default Values Set at Factory (Network)

Default Values Set at Factory (Network)
Default Values of the LAN Connection
Item The default
Change LAN LAN inactive
SSID BJNPSETUP
Communication mode Infrastructure
Wireless LAN security Disable
IP address (IPv4) Auto setup
IP address (IPv6) Auto setup
Set printer name XXXXXX000000
TCP/IP settings IPv4/IPv6
Enable/disable IPv6 Active
Enable/disable WSD Active
Timeout setting 1 minute
Enab./disab. Bonjour Active
Service name (Bonjour settings) Canon E480 series
LPR setting Active
DRX setting Active
("XXXXXX" is the last six digits of MAC address of the machine.)
Default Values of the Access Point Mode
Item The default
SSID (access point name) XXXXXX-MX490series
Security setting WPA2-PSK (AES)
Password Serial number of the machine
("XXXXXX" is the last six digits of MAC address of the machine.)
224