Scanning Multiple Documents at One Time from the ADF (Auto
Document Feeder)
Place multiple documents on the ADF (Auto Document Feeder) and scan at one time.
Note
• You can scan multiple documents at one time from the ADF when scanning via Auto, Document,
Custom, or Driver.
Refer to "Scanning with Scanner Driver" for how to scan using the scanner driver.
Using Auto Scan:
The item type is detected automatically. Click Auto in the IJ Scan Utility main screen and scan.
Easy Scanning with Auto Scan
Not Using Auto Scan:
In the Settings dialog, set Select Source to ADF or Auto, and scan.
Note
• The screens for scanning documents are used as examples in the following descriptions.
1.
Place the documents on the ADF.
Placing Documents (ADF (Auto Document Feeder))
2.
Start IJ Scan Utility.
3.
Click Settings....
The Settings dialog appears.
4. Click Document Scan.
388
To Next Page
Loading...
