Configuring i-Vu® Open Link Driver Properties
i-Vu Open Link Carrier Proprietary and Confidential CARRIER CORPORATION ©2017
Installation and Start-up Guide All rights reserved
23
Issue Confirmed
Notifications
Select to have a device continue sendin
g an alarm message until it receives
delivery confirmation from the recipient.
Uncheck the types of alarms you do not want the recipient to get.
Calendars
Calendars are provided in the driver for BACnet compatibility only. Instead,
use the
Schedules feature in the i-Vu®
or Field Assistant interface.
Common and Specific Alarms
On these pages, you can enable/disable, change BACnet alarm properties, or set delays for the following BACnet
alarms:
• All Programs Stopped
• Control Program
• Duplicate Address
• Excessive COV
• Locked I/O
• Module Halted
• Program Stopped
• Dead Module Timeout
• Low Battery Alarm
NOTE To set up alarm actions for controller-generated alarms, see Set up alarm actions in i
-
Vu® Help.
Controller-generated Alarm
Short message shown on i-Vu®'s Alarm page or in an alarm action when this
type of alarm is generated.
Clear these checkboxes to disable Alarm or Return to normal messages of this
type from this controller.
Do not change this field.