CAS CL5200 Series User Manual

11
2
2.11.5.2 List Job Batch Schedule (Menu code 1452)
( MENU → 4. Store Data Table → 5. Job Batch Schedule →
2. List Schedule )
1. Set the list range
• Set the list range to check
EX) Job Batch Schedule No.’s 1~10
2.11.5.3 Delete Job Batch Schedule (Menu code 1453)
( MENU → 4. Store Data Table → 5. Job Batch Schedule →
3. Delete Schedule )
1. Job Batch Schedule number to delete
EX) Delete Job Batch Schedule no. 2
Note: There is no confirmation request when
deleting a Job Batch Schedule No. Pressing the
PRINT key will cause the Job Batch Schedule No.
entered to be deleted.
2.11.6 Scanner (Menu code 1460)
( MENU → 4. Store Data Table → 6. Scanner )
This menu is used to make barcode scanning sale available or just to call up PLU.
These are operable functions and setting methods when using by connecting the barcode scanner to
CL5000 series.
2.11.6.1 New/Edit Scanner Conversion Table (Menu code 1461)
( MENU → 4. Store Data Table → 6. Scanner →
1. New/Edit Comv Table )
This is Mapping Table between each scanned bar code and each PLU number.
1. Setting up scan code No
Maximum number of Conv Table. Index is 1999
2. Setting up mapping Code
Enter the number ranged between 1 and 13.

CAS CL5200 Series Specifications

General

Brand	CAS
Model	CL5200 Series
Category	Scales
Language	English