CAS CL5200 Series User Manual

14
6
2.14.6.5 Printer Sensor Test (Menu code 1865)
( MENU → 8. SCALE CONFIG → 6. Test → 5. Printer Sensor )
To test printer sensor, press “5” on
Test menu screen. The scale shows
the conditions of current printer.
▶ Printer Sensor Test Items
No Test Items Description
1 Peel-off To test that peel-off sensor is properly work.
2 Head-up To test that TPH is opened or not
3 Gap To show real time Gap sensor’s value.
4 Peel To show real time peel off sensor’s value.
2.14.6.6 Memory Information (Menu code 1866)
( MENU → 8. SCALE CONFIG → 6. Test → 6. Memory Information )
To see memory information, press “6” on
Test menu screen. The display shows
current memory size. 0 indicates 1MB.
You can exit from this menu, by pressing
“X/ESC” key.
2.14.6.7 Firmware Version (Menu code 1867)
( MENU → 8. SCALE CONFIG → 6. Test → 7. Firmware Version )
You can check firmware version of the
scale.
2.14.6.8 Communication (Menu code 1868)
( MENU → 8. SCALE CONFIG → 6. Test → 8. Communication )
2.14.7 Scale Parameter (Menu code 1870)
( MENU → 8. SCALE CONFIG → 7. Scale Parameter )

CAS CL5200 Series Specifications

General

Brand	CAS
Model	CL5200 Series
Category	Scales
Language	English