201
④
Remove the item(s) from the platter.
Note: - If you set “Label Prt. w.o Rewind (X Key)” to “Y” in menu 1872 of
program mode, the scale does not check peel-off, so you have to
press FEED key after printing is done. (See chapter 2.14.21)
- If you set “Use double print(AUTO)” to “Y” in menu 1872 of program
mode, you will have two same labels in auto mode.
- If you set 2nd label in PLU programming, 2nd label is issued
automatically.
3.14.2 Non-Weighed PLU
You can use X key for by Count, By PCS PLU without any setting. The way
of using X key is same as by-weight PLU except weighing item.
To Next Page
Loading...
