8
2.4 Discount Programming
2.4.1 Discount (Menu code 1130)
( MENU → 1. PLU → 3. Discount )
The Discount Programming Menu is used to program promotional pricing for
individual PLU's. Discount pricing can be accomplished using Menu code 1130 or by
using the CL-Works Software. Discount information must be programmed in each
PLU.
2.4.1.1 New/Edit Discount (Menu code 1131)
(MENU → 1. PLU → 3. Discount → 1. New/Edit )
◆
You can use the PG UP and PG DOWN keys to navigate from page to page,
or you can use the Arrow keys to go through each page 1 line at a time.
1. Enter department number and PLU
number.
EX) Department Number = 1
PLU Number = 1
2. Enter discount type
• Refer to Discount Type table as below
※ Discount information can be different
depending on the discount type.
EX) 1. Unit Price Discount
To Next Page
Loading...
