CAS CL5200 Series - List Tare (Menu Code 1272); Delete Tare (Menu Code 1273)

7
0
2 Weight Tare Put a container on the platter
4. Enter Tare Value
EX) Tare = 0.010 Kg
5. Exit Menu
• If you want to exit, press ESC key.
※
If you set Tare No. to 1 when you create
PLU, tare is set to 0.010kg that is
programmed here.
2.2.7.2 List Tare (Menu code 1272)
( MENU → 2. PLU Data Table I → 7. Tare → 2. List )
1. Set the list range
• Set the range of Tare No.’s that you wish to
check
EX) Tare No. 1~10
• Press Print Key to List Tare No.'s on screen.
After Tare No.'s are listed on the screen,
pressing the TEST key will print the Tare
No.'s.
2.2.7.3 Delete Tare (Menu code 1273)
( MENU → 2. PLU Data Table I → 7. Tare → 3. Delete )
1. Enter tare number to delete
EX) Delete tare no. 1