CAS CL5200 Series - Editing PLU (Menu Code 1120); Management(Menu Code 1140); Copying PLU (Menu Code 1141)

5
3
2.1.4 Editing PLU (Menu code 1120)
( MENU → 1. PLU → 2. New/Edit )
◆
You can call up existing PLU information for edit.
2.1.5 Management(Menu code 1140)
2.1.5.1 Copying PLU (Menu code 1141)
( MENU → 1. PLU→ 4. Management → 1. Copy)
• If there is a similar PLU, you can copy it.
1. Select Source
• Enter the Department No. and PLU No.
that you wish to copy
EX) Source Department # = 1
Source PLU # = 1
Note : If PLU number exists in destination
department you will be asked to confirm
the copy.
2. Select Destination
• Enter the Department number where the
New PLU(s) will be located
• Enter the PLU number that you wish to
copy the Source PLU into
EX) Destination Department # = 2
Destination PLU # = 1
Note : If PLU number exists in destination
department you will be asked to confirm
the move