18
3.7 Discount
Before using discount function, you have to set discount data in menu 1130
of program mode. Discount is different depending on PLU type. (For details,
see chapter 2.4.1)
3.7.1 Unit Price Discount - By Weight PLU
EXAMPLE:
- PLU# 29=Water Melon (By-Weight PLU), Unit price=20.00
• 1st Target of Discount: “Discount amount from unit price”=0.50 for weight 0.500.
• 2nd Target of Discount: “Discount amount from unit price”=1.00 for weight 1.000.
①
Call up a PLU.
②
Place an item on the platter. In this case, discount
is not available because the weight of this item
(0.489 kg) is lower than 1st target(0.500 kg).
③
Place an item on the platter. In this case, discount
is possible because the weight of item(0.526 kg)
is greater than 1st target (0.500kg) therefore the
total price is 10.26.
To Next Page
Loading...
