CAS CL5200 Series - NewEdit Tare (Menu Code 1271)

6
9
Note: Tare weights for use in Tare No.'s can be programmed using the known numeric
value or by placing the actual container on the scale.
2.2.7.1 New/Edit Tare (Menu code 1271)
( MENU → 2. PLU Data Table I → 7. Tare → 1. New/Edit )
1. Enter Tare No.
• This value can be from 1 to 99.
EX) Tare No. = 1
2. Tare Description
EX) Tare Description = Container
3. Tare Type
• There are 2 types of Tare Weights that can
be entered.
Ex.) Tare Type = 1 Numeric Type
Enter the numeric value using the number keys
Ex.)Tare Type = 2 Weight Type
Place the container on the platter and press
the PRINT key after the weight stabilizes.
▶ Type of Tare
Tare No. Type of Tare Description
1 Numeric Tare Enter tare weight by using numeric keys.