161
2.15.7 X1/X2 Group Report (Menu code 1614/1644)
( MENU → 6. Report → 1. X1 Report /X2. Report → 4. Group )
Press “4” key on X1/X2 Report menu screen.
Enter group range to check
If you do not set group in PLU setting, it is
1 : Miscellaneous by-count
Ex) Group 0 ~ Group 23
You can see group sales data by pressing
“PRINT” key.
To print report, press the “TEST” key.
* If your scale is in label mode, the scale
shows “Do you want to print on label?”.
* If your label has gap, press 1. if you want
to print report on ticket, press 0 and
change the setting to Ticket in menu 1731
then change your label to ticket.
Note: Because of auto gap sensor printer will not print on where the gap is.??
To Next Page
Loading...
