CAS CL5200 Series - Deleting PLU (Menu Code 1142); Moving PLU (Menu Code 1143)

5
4
2.1.5.2 Deleting PLU (Menu code 1142)
( MENU → 1. PLU→ 4. Management → 2. Delete)
• If There are three ways to delete PLU. Simply enter the number that you wish to delete.
EX) Press 1 key to select Delete by PLU
No.
EX) Department No. : 1
PLU No. : 1
Note: There is no confirmation request for
deletion. After entering the PLU number and
pressing Print, the PLU will be deleted.
2.1.5.3 Moving PLU (Menu code 1143)
( MENU → 1. PLU→ 4. Management → 3. Move)
• All the PLU information will move with commend (discount, Tax, barcode type, etc)
1. Select Source
• Enter the Department No. and PLU No.
which you wish to move
EX) Source Department # = 1
Source PLU # = 1
2. Select Destination
• Enter the Department number where the
PLU(s) will be located
• Enter the PLU number that you wish to
move the Source PLU into
EX) Destination Department # = 2
Destination PLU # = 1
Note : If PLU number exists in destination
department you will be asked to confirm
the move