13
or Time separator.
4. Press “PRINT” key to save it and go
out to SCALE CONFIGURATION
main menu.
2.14.5 User/ Security Configuration (Menu code 1850)
( MENU → 8. Scale Config → 5. User/Security Configuration )
This section is to create, edit, change, list, delete clerk’s security
information and configure security level.
2.14.5.1 New/Edit User(Menu code 1851
( MENU → 8. Scale Config → 5. User/Security Con → 1. New/Edit )
Enter appropriate USER data for CLERK number, CLERK NAME,
NICKNAME, CLERK PASSWORD, CLERK LEVEL, and Use For Training.
EX) CLERK No.=[2],
CLERK NAME =[CHRISTOPER],
NICKNAME =[CHRIS],
CLERK PASSWORD =[0115],
CLERK LEVEL =[3],
Note: If you use floating mode, you have
to register all clerks.
▶ NEW/EDIT USER in USER’S Security Condition
No Operation Modes Description
1 Clerk No. This value can be from 1 to 95.
2 Clerk Name This value is available up to 22 characters.
3 Nickname
This value is available up to 7 characters. It can be
printed on a label and displayed on the scale.
4 Clerk Password 4 digit (alphanumeric)
5 Clerk Level 0~3 level
To Next Page
Loading...
