4
CODE Menu CODE Sub Menu CODE Sub Menu
1900
Communi
cation
1910
Network
Setting
1911 Service Type
1912 DHCP
1913 IP
1914
Remote IP
1915
RS232C
1916
WLAN setting
1917
WLAN Config
1920
Application
1930
Scale Lock/Unlock
1940
Check Scale
1950 Backup to Scale
1960 Slave Scale
You can see the Program Menu screen by pressing the MENU key.
The 2 numbers at top right (1/3) indicate the number of pages or screens. The
number to the left of the slash is the current page or screen number and the number to
the right of the slash indicates the total number of pages or screens. You can use the
PG UP and PG DOWN keys to navigate from page to page, or you can use the Arrow
keys to go through each page.
If you press “PG DOWN” key, you can see other menu screens as below.
To Next Page
Loading...
Need help?
General
