2.9 Printing Programming(Menu code 1700)
This chapter explains how to set printing-related environments, such as
print label item, markdown, Hardware, serial number format, and ticket.
▶ PRINT Submenu
Select item(s) which is(are) not printed on label.
Markdown. Select “Yes” or “No” to print both of
original and discount information on the label.
Set the label type and sensor of printer
Set the format of serial number to print label or
ticket
Select add-up total label whether is printed or not
Set printing item for ticket
2.9.1 Print label item (Menu code 1710)
( MENU → 7. Print → 1. Print Label Item )
If you set any of the items to N, they will not be printed on any labels
regardless of the label format.
You can use the PG UP and PG DOWN keys to navigate from page to page, or you
can use the Arrow keys to go through each page.
◆ You can press the SAVE key at anytime to save the current data and if
you want to exit without saving, press the ESC key.
1. If you do not want to print, enter 0(N),
If you want to print, enter 1(Y).
To Next Page
Loading...
Need help?
General
