CAS CL5200J Series - Delete Origin (Menu Code 1253); Barcode (Menu Code 1260); NewEdit Barcode (Menu Code 1261)

52
3. Exit Menu
• If you want to exit, press ESC key.
2.2.5.2 Delete Origin (Menu code 1253)
( MENU → 2. PLU Data Table I → 5. Origin → 3. Delete )
1. Enter Origin No.
EX) Delete Origin 10.
Note: There is no confirmation request when deleting a Origin. Pressing the PRINT key
will cause the Origin entered to be deleted.
2.2.6 Barcode (Menu code 1260)
( MENU → 2. PLU Data Table I → 6. Barcode )
Up to 20 different Barcode Formats can be programmed in the CL5200J series. Different
Barcode Formats can be assigned to individual PLU's or one Barcode Format can be
used for all PLU's by enabling the Global Barcode Format Setting (Menu 1520).
2.2.6.1 New/Edit Barcode (Menu code 1261)
( MENU → 2. PLU Data Table I → 6. Barcode → 1. New/Edit )
1. Enter Barcode No.
• This value can be from 1 to 20.
EX) Barcode No = 1