CAS CL5200J Series - Delete Scanner Conversion Table (Menu Code 1463); NewEdit Scanner Conversion Table (Menu Code 1461); Scanner (Menu Code 1460)

91
PRINT key will cause the Job Batch Schedule No. entered to be deleted.
2.7.6 Scanner (Menu code 1460)
( MENU → 4. Store Data Table → 6. Scanner )
This menu is used to make barcode scanning sale available or just to call up PLU.
These are operable functions and setting methods when using by connecting the
barcode scanner to CL5200J series.
2.7.6.1 New/Edit Scanner Conversion Table (Menu code 1461)
( MENU → 4. Store Data Table → 6. Scanner →
1. New/Edit Conv Table )
This is Mapping Table between each scanned bar code and each PLU number.
1. Setting up scan code No
Maximum number of Conversion Table. Index is 1999
2. Setting up mapping Code
Enter the number ranged between 1 and 13.
3. Setting up department No
Enter the Department number of the PLU to be mapped.
4. Setting up PLU No
Enter the PLU number to be mapped.
EX)
Index
The value to be compared with
data from a bar code
Department and PLU no. to be
mapped
Code No
Mapping Code
Department No
PLU No
1
2855551
1
1
2
2855552
1
5
~
~
~
~
1999
2867890
1
220
2.7.6.2 Delete Scanner Conversion Table (Menu code 1463)
( MENU → 4. Store Data Table → 6. Scanner →