Note: - You have to set Clerk log out time in menu 1874 of program mode.
(See chapter 2.14.7) If you do not call a PLU and do not operate the
scale, time is computed. To set 30 seconds for logout time, enter 300.
If you do not want to log out, enter 0.
- When there is no PLU, you can print ticket again by pressing X key (It
depends on the setting of parameter 599, Print last ticket)
3.9.1 Standard Clerk Operation
Assumption
- You have to set “S.MODE” to “2” (Standard Clerk) in menu 1820 of program mode.
(See chapter 2.14.3)
EXAMPLE 2:
Clerk No: 2, Clerk Name: Christine, Clerk Key: V1
PLU#1=Apple, Unit Price 10.00, Weight, 1.2 kg
PLU#2=Orange, Unit Price 20.00, Weight, 1.2 kg
① Call up a PLU.
② Place an item and press V1 key. You will
get a label automatically.
③ Call up a PLU.
To Next Page
Loading...
