CAS CL5200J Series - Edit Scroll Message (Menu Code 1432)

84
use “Scroll Message”.
- Wait-time
This value can be from 1 to 6000 seconds.
Ex.) 5 seconds
2.7.3.2 Edit Scroll Message (Menu Code 1432)
( MENU → 4. Store Data Table → 3. Scroll Message → 2. Edit Scroll Message )
This Menu allows you to program the actual information that will be in the Scrolling
Message. You may input up to 9 messages and use two different scrolling effects.
1. Enter Message No. and Message Text
• Enter Message No. and Message Text.
Ex.) Message No. = 1
Ex.) Message Text = Scale Mart
2. Set Speed
• Speed means the scrolling/blinking
speed.=> for the text speed is representing the moving speed of the text, and when it is
blinking speed, it represents the speed of the blinking. User may set it from 1 to 99..
(unit = 0.1m/s)
Ex.) SPEED = 10