2.4 Discount Programming
2.4.1 Discount (Menu code 1130)
( MENU → 1. PLU → 3. Discount )
The Discount Programming Menu is used to program promotional pricing for
individual PLU's. Discount pricing can be accomplished using Menu code 1130 or by
using the CL-Works Software. Discount information must be programmed in each
PLU.
2.4.1.1 New/Edit Discount (Menu code 1131)
( MENU → 1. PLU → 3. Discount → 1. New/Edit )
◆ You can use the PG UP and PG DOWN keys to navigate from page to page, or
you can use the Arrow keys to go through each page.
1. Enter department number and PLU
EX) Department Number = 1
• Refer to Discount Type table as below
※ Discount information can be different
depending on the discount type.
To Next Page
Loading...
