CAS CL5200J Series - Programming PLU Data Table II; Ingredient (Menu Code 1310); NewEdit Ingredient (Menu Code 1311)

60
2.3 Programming PLU Data Table II
2.3.1 Ingredient (Menu code 1310)
( MENU → 3. PLU Data Table II → 1. Ingredient )
2.3.1.1 New/Edit Ingredient (Menu code 1311)
( MENU → 3. PLU Data Table II → 1. Ingredient → 1. New/Edit )
◆ You can press the SAVE key at anytime to save the current data and if
you want to exit without saving, press the ESC key.
1. Enter ingredient number.
• This value can be from 1 to 1000.
EX) Ingredient number = 1
2. Enter ingredient
EX) Ingredient Line1 = SALT
EX) To print “SUGAR” on next line,
enter “  ” after SALT.
• Note: Pressing the PG UP or PG DOWN key will move the cursor to the
beginning or end of the brackets respectively.
3. Exit menu
• If you want to exit, press ESC key.