To set zero press “ZERO”
User may exit from this menu, using “X/ESC” key
2.10.6.3 Keyboard Test (Menu code 1863)
( MENU → 8. SCALE CONFIG → 6. Test → 3. Keyboard )
To test keyboard, press “3” Display will
show grid point Press any key to test key pad.
To exit keyboard test, press “ESC” two times.
2.10.6.4 Chess Printer Test (Menu code 1864)
( MENU → 8. SCALE CONFIG → 6. Test → 4. Chess Print )
Press “TEST” key to test printing a label.
2.10.6.5 Printer Sensor Test (Menu code 1865)
( MENU → 8. SCALE CONFIG → 6. Test → 5. Printer Sensor )
To test printer sensor, press “5” on
Test menu screen. The scale shows
the conditions of current printer.
To Next Page
Loading...
Need help?
General
