Chapter 12: Program Application 207Chapter 12: Program Application 207
BinomialCD k
Syntax: BinomialCDLower value, Upper value,
Numtrial value,
pos value
Function: See “Binomial Cumulative Distribution”
(page 152).
Break Ctrl - Control
Syntax: Break
Function: This command terminates a loop and
causes execution to advance to the next command
following the loop process.
Description:
• Break terminates a loop and causes execution to
advance to the next command following the loop
process.
• Break can be used inside of a For, Do, While, or
Switch process.
Broken Misc - Statistics(1) - Graph
Function: Used as a StatGraph command argument
to specify an option. See StatGraph.
C
CallUndef Misc - Graph&Table(1)
Function: Used as a ViewWindow command
argument to specify an option. See ViewWindow.
Case Ctrl - Switch
See Switch~Case~Default~SwitchEnd.
ChiCD k
Syntax: ChiCDLower value, Upper value,
df value
Function: See “χ
2
Cumulative Distribution” (page 152).
ChiPD k
Syntax: ChiPD
x value, df value
Function: See “χ
2
Probability Density” (page 152).
ChiGOFTest k
Syntax: ChiGOFTest<Observed list name>,
<Expected list name>,
df value
Function: See “χ
2
GOF Test” (page 148).
ChiTest k
Syntax: ChiTest<Observed matrix name>
Function: See “χ
2
Test” (page 148).
ChrToNum Misc - String(1)
Syntax: ChrToNum"<string>", <storage variable
name>[,
n]
Function: Converts the characters up to the
nth
character of a string to their character code values
and assigns the string to the specified variable.
Description: Omitting “
n” starts conversion from the
first character of the string. For information about
character codes, see “Character Code Table” on page
295.
Circle I/O - Sketch
Syntax: Circle<center
x-coordinate>, <center
y-coordinate>, radius[,<color command>]
Function: Draws a circle.
Clear_a_z Misc - Variable
Syntax: Clear_a_z[<folder name>]
Function: Deletes all single letter lower-case named
variables from
a through z from the specified folder.
Description:
• If you don’t specify a folder name, the variables of
the current folder are cleared.
• Deletes all variables from
a through z, regardless of
type (program, etc.). See GetType for information
about variable types.
• Keep in mind that this command clears all data
types, including programs, functions, etc.
ClearSheet Misc - Graph&Table(1) - Sheet
Syntax: ClearSheet [{<sheet number> ; "<sheet
name>"}]
Function: Deletes the sheet name and expressions
on the sheet, and returns its settings to their default
values. Omitting the argument causes all sheets to be
cleared.
CloseComPort38k I/O - Communication
Syntax: CloseComPort38k
Function: Closes the 3-pin COM port.
ClrGraph I/O - Clear
Syntax: ClrGraph
Function: Clears the Graph window and returns View
Window parameters to their initial default settings.
ClrPict Misc - Graph&Table(2)
Syntax: ClrPict
Function: Clears an image recalled by the RclPict
command.
ClrText I/O - Clear
Syntax: ClrText
Function: Clears text from the Program Output
window.
Cls I/O - Clear
Syntax: Cls
Function: Clears sketch elements (lines and other
figures sketched on the Graph window), and graphs
drawn using drag and drop.
To Next Page
Loading...
