212
USING THE CAMERA WITH A COMPUTER
1. Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle and then
plug it in to a household power outlet.
• Note that the shape of the AC adaptor depends on the
area where you purchased the camera.
• If you do not plan to use the AC adaptor, make sure that
the camera’s battery is fully charged.
2. Connect the USB cable that comes bundled
with the camera to the USB cradle and the
USB port of your computer.
• Orient the USB plug so it correctly matches the shape of
the USB port when you connect them.
• Plug the USB cable into the ports securely, as far as it will
go. Proper operation is not possible if connections are not
correct.
[ ] (USB) Connector
Connector A
Connector B
USB Cable (Bundled)
USB Port
To Next Page
Loading...
