Casio fx-9860G AU - To Delete a Step

20050401
In the Linear input mode, pressing !D(INS) changes the cursor to ‘‘ ’’.
The next function or value you input is overwritten at the location of ‘‘ ’’.
Acga
ddd!D(INS)
s
To abort this operation, press !D(INS) again.
u To delete a step
○○○○○
Example To change 369 × × 2 to 369 × 2
Adgj**c
dD
In the insert mode, the D key operates as a backspace key.
1-3-2
Inputting and Editing Calculations
#The cursor is a vertical flashing line ( I ) when
the insert mode is selected. The cursor is a
horizontal flashing line (
) when the overwrite
mode is selected.
# The initial default for Linear input mode is the
insert mode. You can switch to the overwrite
mode by pressing 1Y(INS).